The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. |
QuikSert® In-line Turbine Flow Meter :: Sizes 3/8" to 10"
The Blancett QuikSert In-line Turbine Flow Meter provides the high accuracy and rigorous design of the standard Blancett turbine, but in a wafer-style mounting configuration. With a unique "between-the-flange" design, the need for mating flanges is eliminated, saving installation time and cost, and allowing for limited space requirements. The meter features a 316 stainless steel housing and rotor support, CD4MCU stainless steel rotor, and abrasion-resistant tungsten carbide rotor shaft and bearings. For fluid models, precision upstream and downstream flow straighteners ensure a high degree of measurement accuracy.
Accuracy(Fluid): |
±1% of reading for 7/8" and larger meters; ±1% of reading over the upper 70% of the measuring range for 3/8", 1/2" and 3/4" meters |
Accuracy(Gas): | ±2% of reading over the specified measuring range |
Repeatability: | ±0.1%(Fluid),±0.5%(Gas), |
Operating Temperature: |
-150 °F to +350 °F (-101 °C to +177 °C) (Fluid Standard) Temperatures to +425 °F (+232 °C) (Fluid with high-temp pick-up) -40 to +330 °F (-40 to +330 °C) (Gas) |
Turndown Ratio: | About 10:1 |
End Connections: | Wafer-style, ASME/ANSI B16.5-1996 |
Selection of Flow Displays available ►►►
Design © 2012-2019 Badger Meter UK agent. All rights reserved.
Website by Firemouth | Template by xcartmods